Description
Compared to the previous model, the EM-8eIII can handle higher concentrations from 100mg/m3 to 200mg/m3.
A general water-soluble mist collector has a concentration of 20mg/m3, so it has 10 times higher collection power.
Compared with the old needle type, this model stably collects highly concentrated mist by increasing the number of discharge points per unit area by several hundred times.
Oil mist particle size is about one-tenth smaller than water-soluble mist. Oild mist concentration is 10 times higher than water-soluble mist. Oil mist mass increases 1000 times more than water-soluble oil mist. The EM Series of electronic mist collectors is the only one that collects mist from your process machine which uses pure and straight oil-based cutting fluid.
Difference Pure Oil mist and Water soluble oil mist
“OIL MIST” characteristic depends on the cutting fluid type (Water-based or Straight Oil). Oil mist is a cutting fluid “vaporized” by heat. Water-soluble oil mist is when the cutting tools are physically “sheared” by the blade. Therefore, the water-based mist particle is bigger than 2-10μm, while for straight oil the mist particle is smaller than 2μm and below. The particle size difference between water-based and straight oil is more than 10 times. And also the mist concentration is more than 10 times. If you are using straight oil as a cutting fluid, EM Series is the best choice.
Breakthrough Electronic Trapping Method
Air containing mist particles passes through the charging section having the corona effect, and those mist particles become positively charged. When this charged mist flows into the final stages of the mist collector, it is electrostatically attracted to the mist collector plate (ground electrode) where it is collected and trapped.
No Clogged Filter
Unlike the old filter method, there is absolutely no drop in airflow due to clogging so airflow is always stable during operation.
Internal Structure
EXTERNAL VIEW
unit: mm
